GE 7FA Nozzle Repair by Stage: What Changes from Stage 1 to Stage 3 (Complete Guide)
GE 7FA nozzle repair is not a single procedure applied uniformly across the hot gas path. Stage 1 nozzles face inlet gas temperatures approaching 2,400°F and require TBC recoating and cooling passage restoration. Stage 2 nozzles shift focus to oxidation and hot corrosion. Stage 3 nozzles primarily need dimensional restoration and trailing edge crack repair....
Learn More
7FA Shrouds, Seals & Hardware: Why Small Component Failures Cause Catastrophic Turbine Downtime
If your GE 7FA gas turbine is showing rising exhaust temperatures, compressor efficiency loss, or flagged borescope findings, the culprits are most likely the smallest components in the hot section — and the ones with the least margin for error. 7FA shrouds, seals, and hardware operate at tolerances measured in thousandths of an inch, inside...
Learn More